KTV-3AM(R)

Automatic Shear Tester and Short Circuit Testing Machine For Motorcycle Battery

After battery has been finished the through-the-partition intercell welding, the shear tester will check the thru-the-partition intercell welding condition for the battery, and then it will be passed into next station to do short circuit testing.
Sequence of Operation
After the battery is completed the process of welding, this battery will be delivered to the waiting gate of this testing machine, and conveyed into the testing position once time is ready. The shear testing head (tooling) will move up and down automatically to process the continuous testing under fully automatic operation. If bad-weld condition or short circuit was found, the machine will alarm and the conveyor will push the battery into the rejection area. After the completion of rejection cycle or testing cycle, the machine will continue next operation.
Feature
  • The operation and adjustment of shear force are easy, and can get the accurate check.
  • It can change the testing voltage. (Max.: 2000V)
  • It's suitable to test all types of motorcycle battery.
  • It is equipped with the system of auto-stop of no feeding and auto-start of refeeding to avoid idle operation.
  • Utilities Requirement
  • Electricity: 1 or 3 Phase, voltage and frequency to suit customer's specifications
  • Compress Air Consumption: 62nl[P.S.]/min at 6kg/ cm 2
  • Electricity consumption: 2.5 kw
  • Dimension and Weight
  • Approx. 3050(L)×1030(W)×1880(H)mm
  • Approx. 1000 kgs
  • Other
    Battery Hole Punching Machine, Fully-Automatic Assembly Line For Automotive Battery, Sealed Battery Casing.