Accessories Equipment Machines
Automatic Shear Tester Machine For Motorcycle Battery


Automatic Shear Tester Machine For Motorcycle Battery

After battery has been finished the through-the-partition intercell welding, the shear tester will check the thru-the-partition intercell welding condition for the battery.
Sequence of Operation
After the battery is completed the process of welding, this battery will be delivered to the waiting gate of this testing machine, and conveyed into the testing position once time is ready the testing head (tooling) will move up and down automatically to process the continuous testing under fully automatic operation. If bad-weld condition was found, the machine will alarm and the conveyor will push the battery into the rejection area. After the completion of rejection cycle or testing cycle, the machine will continue next operation.
  • The operation and adjustment of shear force are easy, and can get the accurate check.
  • It's suitable to test all types of motorcycle battery.
  • It is equipped with the system of auto-stop of no feeding and auto-start of refeeding to avoid idle operation.
  • Utilities Requirement
  • Electricity: 1 or 3 Phase, voltage and frequency to suit customer's specifications
  • Compress Air Consumption: 52nl[P.S.]/min at 6kg/ cm 2
  • Electricity consumption: 2 kw
  • Dimension and Weight
  • Approx. 2550(L)×1030(W)×1920(H)mm
  • Approx. 800 kg
  • Other
    Battery Equipments, Li-Ion Battery Equipment, Plastic Battery Casing.

    Relevant information