KAH-30M
Aluminum Foil Sealing Machine For Motorcycle Battery
This Aluminum Foil Sealing Machine provides fully automatic heat sealing and side-sealing process of the aluminum foil on the vent hole of motorcycle battery so that the elements groups will not be oxidized before pouring the acid liquid into the battery.
Sequence of Operation
After the battery completed the heat-sealing for container and cover, the battery is delivered to the sealing area by conveyor automatically; then the sealing mold lower to press on the vent hole, heat sealing and cutting automatically. Once completed the sealing, the battery is conveyed next to side-sealing area for final operation, and then the battery is pass to output conveyor.
Feature
- It is suitable for all types of motorcycle battery (also fit to MF battery)
- Capacity: 300-360 batteries/Hr. (2 batteries per cycle)
- This Aluminum Foil Sealing Machine is easy for the operation and maintenance.
- The mold surface is installed with rubber cushion, so that the final defective rate can be reduced.
- This machine is equipped with auto-stop of no feeding.
- It’s easy to install the relative tooling.
Utilities Requirement
- Electricity: 5 KW, 1 or 3 phase, voltage and frequency to suit customer’s specifications.
- Compressed air consumption: 30nl/min. at 5 kg/cm²
Dimension and Weight
- Approx. 2000(L) x 650(W) x 1900(H) mm
- Approx. 500 kgs
Other
Assembly Line For Car Battery, Sli Battery Equipment, Battery Machines.
