Terminal Burning Machine For Automotive Battery

The operator puts the required tooling on this Terminal Burning Machine, and put the battery into the roller table, then adjusts the position of battery and the height of the weld head to get the exact position. Once a battery enters the working area, it is automatically located and stopped in the place.
The weld head lowers down to the battery and perform the ignition, weld, extinguishing and cooling process in sequence; the weld is worked by argon automatically, Upon completion of one cycle process, the finished battery will be automatically pass to exit by conveyor.

It’s tooling is in easy changeover type.

This weld tooling is used with water cooling block.

No flux demand for this weld machine.

Electricity : 1KW, 1 or 3 Phase, voltage and frequency to suit customer's specifications.

Compressed air consumption: 10.4nl/min. at 5 kg/cm²

Compress mix air: 3.8 L./min at 2 kg/cm2 (Mix air: 97% of Argon and 3% of hydrogen).

Approx. 1350(L)* 1200(W)*1600(H) mm

Approx. 1000kgs

Battery Assembly Equipments, Lead Acid Battery Assembly Machines, Casting.