Products

Accessories Equipment Machines
Automatic Shear Tester and Weld Condition Checking Machine For Motorcycle Battery

KTD-3AM(R)

Automatic Shear Tester and Weld Condition Checking Machine For Motorcycle Battery

Description
After battery has been finished the through-the-partition intercell welding, the shear tester will check the thru-the-partition intercell welding condition for the battery, and then it will be passed into the weld condition testing station to check weld condition of each cell to ensure the quality of welding.
Sequence of Operation
After the battery is completed the process of welding, this battery will be delivered to the waiting gate of this testing machine, and conveyed into the testing position once time is ready the testing head (tooling) will move up and down automatically to process the continuous testing under fully automatic operation. If bad-weld condition was found, test value was out of range in any cell or exploded lead was sprayed in any cell was found, the machine will alarm and the conveyor will push the battery into the rejection area. After the completion of rejection cycle or testing cycle, the machine will continue next operation.
Feature
  • The operation and adjustment of shear force are easy, and can get the accurate check.
  • It is easy to change the test tooling (mold) of this machine.
  • It's suitable to test all types of motorcycle battery.
  • It is equipped with the system of auto-stop of no feeding and auto-start of refeeding to avoid idle operation.
  • Utilities Requirement
  • Electricity: 1 or 3 Phase, voltage and frequency to suit customer's specifications
  • Compress Air Consumption: 58nl[P.S.]/min at 6kg/ cm 2
  • Dimension and Weight
  • Approx. 3295(L) x 1200(W) x 1880(H) mm
  • Approx. 1200 kgs
  • Other
    Battery Heat Sealing Machine, Motorcycle Battery Equipment, Positive Tubular Plate Filling Machines.

    Relevant information

    History
      3Inquiry